Choosing an RV campsite is easier when you match the site’s utilities and layout to your rig before booking. This guide explains 20-, 30-, and 50-amp power, water and sewer connections, dump stations, site dimensions, generator rules, and the checks that prevent incompatible reservations.
Overview
“Hookups” can describe several different services, and a campground listing may not include every detail you need. An electric site might provide power but no water. A full-hookup site usually combines electricity, potable water, and a sewer connection, but the exact outlet type, sewer fittings, location, and operating rules still vary.
Before selecting a site, identify four things: what your RV can accept, what it needs for the length of your stay, whether the campground supplies the required services, and whether the physical site fits your vehicle. Your RV’s electrical cord, adapter setup, freshwater connection, sewer hose, tank capacities, slide-outs, awning, and towing configuration all affect the choice.
Electrical service is commonly described by amperage:
| Service | What it generally means | Best fit | Check before booking |
|---|---|---|---|
| 20 amp | A standard household-style receptacle with limited capacity | Small campers, vans, or basic electrical needs | Whether your rig can connect safely and which appliances must be limited |
| 30 amp | A common RV service using a single 120-volt supply | Many smaller and mid-size travel trailers, motorhomes, and campervans | That your RV has a 30-amp plug and that the pedestal matches the listing |
| 50 amp | A higher-capacity RV service with two 50-amp legs | Larger RVs or rigs running several high-draw appliances | Whether the pedestal is truly 50 amp and whether your cord and electrical system support it |
An adapter can change the shape of a plug, but it cannot create additional electrical capacity. A 30-amp RV connected to a 50-amp pedestal still remains a 30-amp RV, and a 50-amp rig connected to a lower-rated outlet may require careful load management or may not be suitable at all. Follow your RV manufacturer’s instructions and use properly rated equipment.
Water and sewer are separate decisions. A site may have electricity without a water spigot, or water without a sewer connection. “Water hookup” should be understood as a connection to the RV’s freshwater system, while a dump station is a shared location used to empty holding tanks. A sewer hookup at the site is more convenient for longer stays, but it still requires the correct hose, fittings, and a safe connection method.
Checklist by scenario
For a short stay with a small camper or campervan
- Confirm the RV’s electrical plug type and whether it can use the campground’s outlet safely.
- Decide whether you need power for refrigeration, charging, climate control, cooking, or only small devices.
- Check whether the site has water, a shared potable-water fill point, or no water service.
- Verify that the vehicle length includes any hitch, rear rack, or tow vehicle required at the site.
- Ask whether generator use is allowed if the site’s electrical service is limited.
For a larger RV or a high-demand electrical setup
- Match the reservation to the RV’s rated service, usually identified on the cord, electrical panel, or owner documentation.
- Check whether the site’s 50-amp listing refers to a dedicated RV receptacle rather than a general description of electrical availability.
- List the appliances you may run together, such as air conditioning, a microwave, an electric water heater, or an induction cooker.
- Confirm the pedestal location and cord length so the connection will reach without unsafe extensions.
- Ask about voltage concerns, electrical restrictions, or seasonal service limitations if the campground provides incomplete information.
For a multi-night stay or full-hookup reservation
- Confirm that electricity, potable water, and sewer are all available at the individual site.
- Check whether the sewer connection is located near the expected RV position and whether a minimum hose length is needed.
- Pack a drinking-water hose, pressure regulator, sewer hose, support system if useful, gloves, and appropriate fittings.
- Ask whether the campground requires a sewer seal or limits when the valve may remain open.
- Verify whether there is a dump station as a backup if the site’s sewer connection is unavailable.
For a pull-through or back-in site
- Compare the listed site length with the complete parked arrangement, including the tow vehicle or towed car.
- Check site width, slide-out clearance, awning space, and room to open storage compartments.
- For a back-in site, review the approach road, turning space, obstacles, and whether the utility pedestal is on the correct side.
- For a pull-through, confirm that the layout does not require disconnecting or repositioning your vehicle.
- Do not assume that a site labeled “long” will accommodate every combination of RV and tow vehicle.
What to double-check
Campground listings are useful starting points, but utility inventories and site details can change. Check the campground’s current reservation description, map, and site-specific notes rather than relying only on a general amenities page. If the information conflicts, contact the campground before paying for a nonrefundable reservation.
Confirm the exact outlet configuration. “Electric available” does not tell you whether the site offers 20, 30, or 50 amps. If adapters are necessary, verify that they are rated for the intended connection and remember that they do not increase the available power.
Confirm water details. Ask whether the spigot is potable, whether water is available year-round, and whether a pressure regulator is recommended or required by the campground. Never assume that a nearby faucet is intended for direct RV connection.
Confirm sewer details. A dump station may be included in the campground but not at your site. Check its location, access hours, vehicle suitability, and any separate use fee. Also verify whether the site connection requires a particular fitting or sealing arrangement.
Review generator rules and quiet hours before relying on a generator as a backup. Restrictions may apply by campground, site type, time of day, season, or fire conditions. A generator also does not replace the need to manage fuel, ventilation, noise, and safe placement.
For a broader site comparison, use the campsite decision matrix alongside this utility checklist. It can help weigh shade, privacy, access, slope, road noise, and proximity to bathrooms as well as hookups.
Common mistakes
- Booking by amperage alone: A site with suitable power may still be too short, narrow, steep, or poorly positioned for your RV.
- Assuming “full hookup” means every convenience: It may not include a sewer hose, pressure regulator, cable service, Wi-Fi, or a site-specific water connection.
- Using an adapter as a capacity solution: Adapters address plug compatibility only. They do not make a lower-rated circuit capable of supporting larger loads.
- Ignoring the complete vehicle length: Measure the RV with its hitch, tow vehicle, rear accessories, and any required clearance.
- Forgetting the utility side: A site may fit physically while placing the pedestal, water spigot, or sewer inlet too far from the RV’s connection points.
- Leaving tank valves open without checking guidance: Follow the RV manufacturer’s instructions and campground rules for gray- and black-water management.
- Relying on old listing details: Hookups can be closed for maintenance, freezing weather, renovations, or seasonal operations.
Before arrival, review the campground arrival and departure checklist so utility connections are made deliberately and safely. If you are traveling with children, pets, or multiple occupants, also account for the extra power, water, and storage demands described in a practical family camping packing list.
When to revisit
Return to this checklist before each reservation, especially when changing RVs, adding a tow vehicle, traveling to a different region, or booking after a campground’s off-season. Recheck the details before the main travel season and after any campground renovation, utility notice, or reservation-system update.
Keep a simple note with your RV’s plug type, electrical rating, total travel length, connection-side layout, hose lengths, and adapter inventory. Before booking, compare that note with the site listing and mark each item as confirmed. If one detail remains unclear, contact the campground and ask for the exact site number, outlet type, utility locations, usable length, and dump-station status. That short check is usually easier than changing an incompatible reservation after arrival.
Finally, save the campground’s current confirmation and utility notes with your trip plan. Conditions can change between booking and arrival, so review the information again a few days before departure and carry a backup plan for limited power, unavailable water, or a shared dump station.